Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Maximum Ratio Threshold of PDCHs in a ce

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #62614
    HW_JUNIOR
    Guest

    Dear Huawei Experts

    There is one parameter in Huawei inner PCU (Maximum Ratio Threshold of PDCHs in a cell)

    Its value is in percent (default=30 %)

    What does this parameter mean? Is it for static or dynamic data TSs?
    Please your advices

    Thanks in advance

    #62615
    HW_JUNIOR
    Guest

    Dears any comment???

    #62616
    SHELDON
    Guest

    Hi HW_Junior,

    This parameter is used to restrict the percentage of TSs that can be used as PDCHs (both static and dynamic).

    Consider a typical 4TRX cell with 1BCCH and 2 SDCCHs. Then:
    Total number of TSs that can be used for traffic(voice or data)=4*8 – 3 = 29.

    Now, if ur ‘maximum ratio threshold of PDCHs in cell’ is 30 for this cell, then:
    Maximum no. of PDCHs = 0.3*29 = 8.7. This means that a maximum of 9 TSs in this cell can be used as PDCHs.

    This also means that if you have eg 2 static PDCHs, then you can have a maximum of 7 dynamic PDCHs.

    Regards,
    SHELDON

    #62617
    HW_JUNIOR
    Guest

    Hi Sheldon

    Thanks for information.
    As I know for static TS I should add PDTCH to Channel Type. If I don’t have any PDTCH TS in a cell and Maximum Ratio Threshold of PDCHs is 30 %.
    What does it mean in this case?
    Is there any static TS in 30% if I have not added PDTCH to TRX.

    Thanks in advance

    #62618
    HW_JUNIOR
    Guest

    Dear Sheldon

    Please your comments, it is very urgent for me.

    Thanks for understanding

    #62619
    SHELDON
    Guest

    Hi HW_Junior,

    This threshold applies to the sum of all PDCHs, whether static or dynamic.

    If you don’t have any static PDCHs (PDTCH TSs) in a cell, then this threshold will only apply to the dynamic PDCHs. That is, a maximum of 30% of TCHs in that cell can be used as dynamic PDCHs.

    Regards,
    SHELDON

    #62620
    HW_JUNIOR
    Guest

    Thanks a lot 🙂

    #62621
    nitin
    Guest

    can anybody explain me ????
    how can i improve EDAP congestion

    #62622
    Vinay
    Guest

    Hello Mr HW_Junior.

    In Huawei Maximum Ratio Threshold of PDTCH in a cells we go for only 30%. And we can use this because user can use multi-slot channel when they use the data.

    If we go for 30 then it comes around 1.8 that is equal to 1, so if you want to use multi-slot then go for more than 30%. And for maximum conversion we are using different parameter in Huawei.

    #62623
    Md.Mamunul islam
    Guest

    Whats the activity of this parameter? can anyone answer..

    Uplink Multiplex Threshold of Dynamic Channel Conversion

    #62624
    newone
    Guest

    Hi guys,

    if my mobile supports 4 timeslot in downlink and in my cell 4 pdch and if i surfing small application then every time i will get 4 pdch or its depends on application?

    is there table in bsc i mean multislot class mobile list?

    #62625
    Omer
    Guest

    Sheldon is right. You can change the threshold if you want more .

    #62626
    krish
    Guest

    Hi sheldon,

    according to ur example if i have 9 pdch ( which includes 2 static) then on abis level how to define ?

    is it is 16 kbps or 64 kbps?

    can u plz help how to define pdch on abis whether its static or dynamic?

    #62627
    krish
    Guest

    hi sheldon,

    Waiting for ur reply….

Viewing 14 posts - 1 through 14 (of 14 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.