Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TN timeslot number in ericsson

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #62486
    Bibbo
    Guest

    Hi,

    in ericsson, is it mandatory to define sdcch channels timeslot number with parameter TN or it can be also automatically assigned if yes what is the parameter

    thanks in advance

    #62487
    SHELDON
    Guest

    Bibbo,

    I’ts not mandatory to define the SDCCH timeslot number (TN). If you don’t specify the TN, then the SDCCH is placed on timeslot 2 by default. However, you can place it on a specific timeslot by using the command:
    RLCCC:CELL=cell, SDCCH=sdcch, TN=tn; The parameter is TN, and, as you would expect, it ranges from 0 to 7;

    Regards,
    SHELDON

    #62488
    Bibbo
    Guest

    Hi thanks for reply Sheldon

    1 more question, for example channel group1 (non-bcch) has no sd defined and there are TN values (like 1,2,3) in this case is there any use of TN?

    #62489
    SHELDON
    Guest

    Hi Bibbo,

    If you have no SDCCHs defined in the channel group, then the TN values are useless.

    Regards,
    SHELDON

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.