Generic selectors
Exact matches only
Search in title
Search in content

DTM Feature activation in B10

Viewing 15 posts - 16 through 30 (of 51 total)
  • Author
    Posts
  • #61842 Reply
    Bijoy
    Guest

    Pix
    “One exception is when the MS is involved in a pure UL transfer, Then DTM needs to be enabled in the cell to ensure that CS page is sent on the PACCH.”

    This statement is for non DTM capable MS.Because during UL transfer,no information is sent from SGSN in DL UNITDATA.In this case,even if IMSI coordination is active,we need to enable DTM on that particular cell where the non DTM capable MS is located.

    Br\\
    Bijoy

    #61843 Reply
    Pix
    Guest

    Bijoy,

    Ok… it’s perhaps a vendor-specific trick.

    Or.. well, perhaps you fear that a MS in pure UL TBF is not going to communicate its IMSI to the PCU. For that purpose (in ALU), there is a way to force this sharing of IMSI, even if the MS is in pure UL TBF (it is called RA CAPABILITY UPDATE). I believe it is a 3GPP feature, because it occurs between PCU and SGSN, on a standardized interface.

    Anyway, a pure UL TBF is rare (impossibly rare ?) 🙂

    cheers
    pix

    #61844 Reply
    Bijoy
    Guest

    Pix
    I’ve never said that IMSI co-ordination will not happen during UL transfer,I’ve only said that to acheive this we have to enable DTM on the cell where the non DTM capable MS is situated so that it may receive the CS paging during GMM mode.

    Hope now everything is clear!!!

    Br\\
    Bijoy

    #61845 Reply
    Pix
    Guest

    Bijoy,

    Yes, but you didn’t explain why.
    It is the “why” I’m trying to understand : why do you need to enable the DTM feature in order to be able to receive a paging.

    cheers,
    pix

    #61846 Reply
    Bijoy
    Guest

    Pix

    Let me find this out whether it is vendor specific or not & what is 3Gpp’s say on this.Will update ASAP

    Br\\
    Bijoy

    #61847 Reply
    SAFAR
    Guest

    HI PIX,BIJOY

    i want to understand main cs paging and all its related parameters.i mean for cs paging from msc to bsc, bsc to bts,bts to ms.

    and all eric parameters like mfframe,t3212,paging group.

    plz help

    #61848 Reply
    Bijoy
    Guest

    Safar
    This forum is a bit restricted to meet your requirements.
    Please read Alex first & then ask for any doubt.

    Br\\
    Bijoy

    #61849 Reply
    finch
    Guest

    Hello,
    what is DTM feature ?

    #61850 Reply
    safar
    Guest

    hi bijoy,

    I am also just discussing if u don’t want to give answer then its ok but don’t give this type of order ok thanks

    #61851 Reply
    Bijoy
    Guest

    Safar
    I’ve no intention to spoil the dignity of this forum.So,please dont use such words,atleast against me.In fact,I’ve given you a suggestion ,if you consider it as an order,its your problem.

    Aside Pix
    i think this restriction is only in Ericsson system,Huawei,ZTE,Motorola & Nokia has no such Issue.Also,the parameter “RA Capability Update”is available in all vendors,but still there is a restriction in Ericsson.Yet to find out why.

    Br\\
    Bijoy

    #61852 Reply
    Pix
    Guest

    Bijoy,
    Thanks for the info’s. I wonder how you can all have all those info about so many vendors..

    .. and thanks also for keeping the dignity of this forum intact 😉

    #61853 Reply
    safar
    Guest

    Hi bijoy,

    don’t take personaly.ok leave it and share ur ideas.

    #61854 Reply
    Spidey
    Guest

    Why we should have the common ID procedure implemented on MSC to ensure DTM?

    #61855 Reply
    Santanu
    Guest

    Hi all,

    Can anyone tell me about DTM feature in MOTOROLA BSC.Is License needed for that to enable it? Wha is the call flow for that ?
    Will there be 2 TS PDTCH & TCH with DTM enabled available with one MS?

    Regards
    Santanu

    #61856 Reply
    Pix
    Guest

    Spidey,

    Hello,

    I know the “Common ID” is used in DTM so that MFS is aware of which DTM MS is in CS-dedicated mode.

    I didn’t know it involved core network as well.

Viewing 15 posts - 16 through 30 (of 51 total)
Reply To: Reply #61856 in DTM Feature activation in B10
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">