- This topic has 50 replies, 1 voice, and was last updated 8 years, 2 months ago by Danish Sharma.
6th April 2010 at 09:27 #61842BijoyGuest
“One exception is when the MS is involved in a pure UL transfer, Then DTM needs to be enabled in the cell to ensure that CS page is sent on the PACCH.”
This statement is for non DTM capable MS.Because during UL transfer,no information is sent from SGSN in DL UNITDATA.In this case,even if IMSI coordination is active,we need to enable DTM on that particular cell where the non DTM capable MS is located.
Bijoy6th April 2010 at 19:09 #61843PixGuest
Ok… it’s perhaps a vendor-specific trick.
Or.. well, perhaps you fear that a MS in pure UL TBF is not going to communicate its IMSI to the PCU. For that purpose (in ALU), there is a way to force this sharing of IMSI, even if the MS is in pure UL TBF (it is called RA CAPABILITY UPDATE). I believe it is a 3GPP feature, because it occurs between PCU and SGSN, on a standardized interface.
Anyway, a pure UL TBF is rare (impossibly rare ?) 🙂
pix7th April 2010 at 12:36 #61844BijoyGuest
I’ve never said that IMSI co-ordination will not happen during UL transfer,I’ve only said that to acheive this we have to enable DTM on the cell where the non DTM capable MS is situated so that it may receive the CS paging during GMM mode.
Hope now everything is clear!!!
Bijoy7th April 2010 at 21:13 #61845PixGuest
Yes, but you didn’t explain why.
It is the “why” I’m trying to understand : why do you need to enable the DTM feature in order to be able to receive a paging.
pix8th April 2010 at 08:41 #61846BijoyGuest
Let me find this out whether it is vendor specific or not & what is 3Gpp’s say on this.Will update ASAP
Bijoy8th April 2010 at 12:41 #61847SAFARGuest
i want to understand main cs paging and all its related parameters.i mean for cs paging from msc to bsc, bsc to bts,bts to ms.
and all eric parameters like mfframe,t3212,paging group.
plz help9th April 2010 at 04:46 #61848BijoyGuest
This forum is a bit restricted to meet your requirements.
Please read Alex first & then ask for any doubt.
Bijoy10th April 2010 at 12:39 #61849finchGuest
what is DTM feature ?10th April 2010 at 19:30 #61850safarGuest
I am also just discussing if u don’t want to give answer then its ok but don’t give this type of order ok thanks12th April 2010 at 04:53 #61851BijoyGuest
I’ve no intention to spoil the dignity of this forum.So,please dont use such words,atleast against me.In fact,I’ve given you a suggestion ,if you consider it as an order,its your problem.
i think this restriction is only in Ericsson system,Huawei,ZTE,Motorola & Nokia has no such Issue.Also,the parameter “RA Capability Update”is available in all vendors,but still there is a restriction in Ericsson.Yet to find out why.
Bijoy12th April 2010 at 05:16 #61852PixGuest
Thanks for the info’s. I wonder how you can all have all those info about so many vendors..
.. and thanks also for keeping the dignity of this forum intact 😉16th April 2010 at 12:56 #61853safarGuest
don’t take personaly.ok leave it and share ur ideas.7th May 2010 at 08:50 #61854SpideyGuest
Why we should have the common ID procedure implemented on MSC to ensure DTM?7th May 2010 at 10:15 #61855SantanuGuest
Can anyone tell me about DTM feature in MOTOROLA BSC.Is License needed for that to enable it? Wha is the call flow for that ?
Will there be 2 TS PDTCH & TCH with DTM enabled available with one MS?
Santanu7th May 2010 at 12:48 #61856PixGuest
I know the “Common ID” is used in DTM so that MFS is aware of which DTM MS is in CS-dedicated mode.
I didn’t know it involved core network as well.