Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Paging group

  • This topic has 2 replies, 1 voice, and was last updated 14 years ago by Pawel.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 26th March 2010 at 12:02 #61730
    Mick
    Guest

    Hi all,

    How MS are allocated on paging groups after registration in a network?

    Thanks

    26th March 2010 at 13:49 #61731
    SHELDON
    Guest

    Hi Mick,

    The paging group for each MS is calculated as a function of its IMSI and the DRX paramater.

    Regards,
    SHELDON

    8th April 2010 at 16:53 #61732
    Pawel
    Guest

    MS calculates the period of time it shall switch on its receiver based on a few parameters like: BS_PA_MFRMS – defines the number of 51-multiframes for periodicity of PCH subchannelnpaging decoding and it may range from 2 to 9.
    BS_CC_Chans, CCCH_GROUP, Paging Group. IMSI is also used for that calculation.

    As far as I remember they are transmitted on SI3 (BCCH).

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.