Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Rxlev formula

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #61618
    skn
    Guest

    can anyone tell me the formula for Rxlev(dbm)

    #61619
    pix
    Guest

    skn,

    rxlev is a measure, not a computation.

    you can convert the dBm into watt and vice-versa.

    X (dBm)=10 log Y (mW)
    http://www.filtro.net/center/encyclopedia/power_conversion.htm

    #61620
    SHELDON
    Guest

    Hi skin,

    As pix said, the rxlev refers to the received power measured by either the MS or BTS. Theoretically, it can be estimated by the formula:

    Rxlev = tx output power + tx antenna gain + rx antenna gain – path loss.

    Regards,

    SHELDON

    #61621
    SKN
    Guest

    You are not understanding my question, we have EIRP, Path loss, etc. whenever we get Rxlev,

    it is coming with negative sign,

    BTS power 43dbm
    antenna gain 17 dbi,

    combiner loss 3db

    we get approx 150-155 as pathloss
    how do we get -40dbm to -110 dbm

    range of Receive level

    how TEMs is calculating Receive level (RxLev)

    #61622
    pix
    Guest

    hi skn,

    sheldon gave you the formula !! just use it with your own values :

    BTS power 43dbm + antenna gain 17 dbi – combiner loss 3db – 155 as pathloss

    = -98dBm

    > how do we get -40dbm to -110 dbm

    just apply the freakin’ formula 🙂

    cheers
    pix

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.