Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PDCH allocation in Alcatel

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • #61571
    pix
    Guest

    can you increase your min pdch to 4 ?

    #61572
    Van_Guen
    Guest

    Hi Pix,
    we changed the SGSNR value and now is OK..Thank you for your assistance.

    #61573
    pix
    Guest

    SGSN release ?
    the SGSN only indicates in the DL LLC that the data is signalling or user-place. If signalling, the MFS will only allocate one PDCH only.
    But GPRS or EGPRS should be irrelevant here.

    Well, anyway, it is a little weird, thanks for the feedback.

    Which release was your SGSN before ?

    Cheers
    pix

    #61574
    Van_Guen
    Guest

    SGSN R99
    BSC was R98

    #61575
    SAM
    Guest

    Dears,

    Can anyone explain me for GPRS/EDGE, suppose I have 2TRX in one cell and I have 2 SDCCH and 2 PDCH (1 dedicated and 1 dynamic PDCH). Now my question is only this 2 assigned PDCH will be used for DATA traffic? What will be the data rate for this 2 PDCH (CS1,CS2,CS3,CS4)? If I want to use more TS for DATA if there is no voice load in the cell do I have to increase the number of PDCH ??

    Thanks in advance.

    #61576
    alanchris
    Guest

    How can I know my data network is congested from MFS sides ( on Pb and Gb interfaces )also considering the GPU capacity?

Viewing 6 posts - 16 through 21 (of 21 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.