Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

uplink/downlink

Viewing 2 posts - 16 through 17 (of 17 total)
  • Author
    Posts
  • #35092
    Nic
    Guest

    Frequencies are allocated in such a way to save battery life (i.e. reduce transmitted power). As the path loss experienced for higher frequencies is higher (Path loss is proportional to frequency. This comes as higher frequencies – smaller wavelength – suffer more attenuation from different obstructions) the higher frequencies in a system are allocated to the side that has fewer power problems, i.e. the BTS to a mobile network or the earth station in a satellite network. This will ensure that the MS or the satellite will use the minimum possible power for communication.

    #35093
    AlexSh
    Guest

    to Zahid.
    >like u said lower frequency offer >less resistance , but why??? i >mean what r the factors???
    the lower frequency, the wave lenght is higher. The more higher lenght becomes bigger compared to environmente things so it has less resistance in small things .

Viewing 2 posts - 16 through 17 (of 17 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.