Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Zero Traffic – Huawei

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #61209
    Jason
    Guest

    Hi Engineers,
    I have three sites each has six cells
    (Dual Band GSM900+DCS1800), in all sites cells 1,2,3,5 and 6 carry traffic but cell 4 no traffic (zero traffic). All the parameters are OK.
    The CGI is the same at NSS and BSS level.
    What could be the reason?
    Please assist.
    Thanks

    #61210
    Fahmi
    Guest

    Dear colleagues,
    I too experience this problem in my network. Zero traffic in urban cells.
    Share your ideas.

    #61211
    campus
    Guest

    -traffic could be very low
    -trx problem
    -soft problem (in case of upgrading)
    wish it helps

    #61212
    Andy
    Guest

    Try to lock the others cell wich take traffic to force traffic to the cell 4.
    If still any traffic check/reset/change TRX carrying BCCH.

    #61213
    campus
    Guest

    you’re right Andy

    #61214
    billel
    Guest

    hi jason
    1-check the BCCH of the cell if it’s in the BA1 and BA2 list
    2-check the layer of the cell my be it has not the same layer like the others
    3-check CBA parameter
    4-finally make drive test in the related area

    #61215
    HasnatBD
    Guest

    Please also check the hardware – combiners, BTS cable connections etc. Because even thought the parameters are not optimized, there should be some traffic. Zero traffic means it doesn;t take ant at all. Also verify through Drive test.

    #61216
    campus
    Guest

    hi billel;
    what do you mean by :
    -BA?,
    -layer,
    -CBA;
    are you working with ericsson bss??
    thank you

    #61217
    Ahmed
    Guest

    Dear Jason & Fahmi…
    try to reset the Cell 4th level, I think this will solve your problem.

    #61218
    Taha
    Guest

    you’re right Andy

    #61219
    Taha
    Guest

    Hi Dear

    PLZ check MOC&MTC if=0 that mean NSS problem Plz check and replay

Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.