Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cell selection Issue

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #61057
    Tauseef
    Guest

    Hello All,

    We are facing a problem in our 2G+3G network that MS enters cell selection mode after a normal 3G to 2G cell reselection; under good 2G radio conditions like mostly C1/C2 is more than 20
    There are 3 scenerios in which we can categorise this behaviour:
    1. MS enters cell selection mode immediately after 3G to 2G cell reselection, after correctly recieving the sys Info Type 3, BA list, mode reports indicating correct decoding of BS list & other parameters.
    2. MS enters cell selection mode after max_retrans & T3126 expiry (Rach attempts are being sent for LU process after 3G to 2G reselection)
    3. MS enters cell selection mode after successful LU process completion following 3G to 2G reselection
    In all these scenerios, RxLev of serving & neighbor cells are found good after 3G to 2G reselection but still MS triggers cell selection mode as per TEMS mode reports, which normally takes 4-5 secs
    Any ideas regarding this issue ll be highly appreciated
    thanks in advance!

    #61058
    Pix
    Guest

    Hello Tauseef,

    What is “cell selection mode” ? What do you mean by that ?

    Sorry for my stupid question… I’m not familiar with this term.

    Pix

    #61059
    Tauseef
    Guest

    Hi Pix,
    By cell selection mode, i mean “PLMN selection mode”, normally gets triggered when MS is switched on or when there is no suitable cell available during Idle mode (coverage gap etc)

    #61060
    Pix
    Guest

    Tauseef,

    ok, it makes more sense now, thanks 🙂

    I’ll let Pan answers, if he is around, I believe he can help you very well with these types of questions.

    cheers
    pix

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.