Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

channel elements dimensioning umts

Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #60949
    SAM
    Guest

    Need help to understand channel elements dimensioning for umts.

    #60950
    sanjay gohel
    Guest

    Hi i am interested to know about ch elements

    #60951
    Iqbal Ahmed
    Guest

    Response this

    can plz. any one share there ideas for channel element…….

    #60952
    jamalludin mohamed
    Guest

    Hi friend do you know how to calculate the available Channel Element in NodeB WCDMA

    #60953
    Zubair
    Guest

    Clear Definition For Channel element
    “A band Channel Element is the resource base required in the Node-B to Provide for one voice channel capacity, including the control plane to Provide for one voice channel capacity, including the control plane signaling, compressed mode, the transmit diversity and softer handover. “signaling, compressed mode, the transmit diversity and softer handover.”

    Factors affecting capacity in WCDMA UL and DL, sorted by descending level of importance as follows: Factors affecting Capacity in WCDMA UL and DL, sorted by descending level of Importance as Follows:
    – UL: No. CE support on each Node B, interference, Node B sensivity, .. – UL: No. CE support on the each Node B, interference, Node B sensivity, ..
    – DL: No. CE support on each Node B Iub interface capacity, power DL, OVSF, … – DL: No. CE support on the each Node B Iub interface capacity, power DL, OVSF, …

    Thus, CE can be viewed as a license for each NodeB capacity (not more). Thus, CE can be viewed as a license for each vertex NodeB capacity (not more).
    Each service will need some different CE UL and DL, such as: the each service will need some Different CE UL and DL, such as:
    AMR 12.2 k: Uplink 1; downlink AMR 12.2 k 1: Uplink 1; downlink 1
    CS / PS 64 K: 3 Uplink, downlink 2 CS / PS 64 K: 3 Uplink, downlink 2
    PS 128/144k: Uplink 5; downlink 128/144k PS 4: Uplink 5; DL 4
    384 k PS: Uplink 10, downlink 8384 k PS: Uplink 10; downlink 8

    #60954
    DJMEL HABIB
    Guest

    in the license etch Node B The channels elements config is UL:272 /DL:48

    – i have a congestion for the ps DL/UP channels elements, the HSUP
    and the HASDP function normal no congestion.

    please can some one answer me about the resolution off this problem

    #60955
    santosh
    Guest

    Friends, I want to know how to calculate CE utilization in WCDMA.

    #60956
    Hussain
    Guest

    Traffic Model

    AMR12.2 (Erl) 0.035 0.035
    CS64 (Erl) 0.000 0.000
    PS64 (kbit) 144.00 96.00
    PS128 (kbit) 0.00 192.00
    PS384 (kbit) 0.00 288.00
    HSPA (kbit) 576.00 2304.00
    Total 720.00 2880.00

    Assumptions
    Subscriber per site (S111) is 586
    SHO overhead 20%
    Retransmission for PS 1%
    Burst Ratio 40%

    Traffic of voice
    0.035*586*(1+20%) = 24.612 Erl
    GoS=2% do =33 Erl

    CE for voice peak traffic
    33 * 1=33 CE

    CE for UL R99 PS64k
    ((144*586)/(64*0.2*3600))*3*(1 20%)*(1 1%)*(1 40%) = 10CE

    Same you can calculate for other RAB Services and HSUPA.

    Thanks

    #60957
    pix
    Guest

    hi hussain,

    do you have some explanations for the last line ? it’s heavy !

    thanks
    pix

    #60958
    Christian
    Guest

    Hello

    Any idea about the 2 Below Radio KPI

    – Average uplink CE congestion rate
    – Power Congestion

    • Which input to use
    • Any Measurement Protocol
    • Minimum Level
    • Formula to use

    Many Thanks for your support

    #60959
    Hussain
    Guest

    Dear

    Last line means you have PS64, PS128, PS384 and HSUPA so you can calculate the CE.

    Thanks

    #60960
    Face
    Guest

    Hello friend…Are the SHO overhead, Burst ratio, retransmission for PS and the formula to calculate CE is vendor dependent or it is a standard values.??

    #60961
    jen
    Guest

    why UL CE is bigger than DL CE?

    #60962
    sha
    Guest

    Hi Hussain, Please explain this forumal again for other services
    CE for UL R99 PS64k
    ((144*586)/(64*0.2*3600))*3*(1 20%)*(1 1%)*(1 40%) = 10CE..

    Thanks in advance

    #60963
    msa
    Guest

    why CE utilization in uplink is more than downlink

Viewing 15 posts - 1 through 15 (of 18 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.