Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PROBLEM MIRRORED DISKS NOT REDUNDANT

  • This topic has 5 replies, 1 voice, and was last updated 6 years ago by MSHAY MOHAMED.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #60871
    KAKA
    Guest

    Hi all;
    can someones can help me about this alarms? (Ericsson MSC APZ 212 40 R13)

    #60872
    Prince
    Guest

    Mirrored disks not redundant simply means that there’s no mirroring of data disk between active and passive node. This normally happens when you either isolate one node from the cluster by issueing this command on the active node fcc_save_to_remove other or there has been an interference on the SCSI bus. if this command has been executed on the active node, then please issue this command to integrate both nodes: fcc_integrate other and the RAID will start rebuilding. Other way will be to check the logical RAID status and if they all have degraded status, you might decide to rebuild them manually by following the OPI: AP fault in ALEX or by power cycling both nodes to rebuild the RAID.

    #60873
    KAKA
    Guest

    Hi Prince.

    Tx for your instructions. I solve the pb by rebuilding disks.

    BR.

    #60874
    prince
    Guest

    you are welcome.

    #60875
    MSHAY MOHAMED
    Guest

    I NEED TO SOLVE( MIRRORED DISKS NOT REDUNDANT )

    #60876
    MSHAY MOHAMED
    Guest

    can someones can help me about this alarm ( MIRRORED DISKS NOT REDUNDANT )

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.