Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Poor RX quality

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #60856
    Ankit
    Guest

    Hi Pix and oder senier members…..Im working for NSN here in India. Im facing this particular problem for a cell.TCH completion and other KPIs are fine bt DLQ is continuously poor. I have checked all the possible reports like 232,196 and Link imbalance report bt all is found to b working fine. No alarm is there.O&M guy has swapped and even changed the TRX and also the jumpher has been checked….plz suggest sumthing…..thanx in advance..

    #60857
    TheDarkKnight
    Guest

    What about the UL Quality? Is the DL Quality VERY bad? You can isolate the TRXs with bad DL Quality and change their frequencies/hopping lists. Other things that can be tried are enabling/disabling DTX, modiying outoging Quality HO parameters (so as to encourage HO t o other cells if Quality goes bad) and enabling RxDiversity. If the bad RxQual is also visible in the drive tests, then its probably a hardware issue

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.