Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

delay in HO attempt

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #60688
    GMN
    Guest

    hi all
    if we have delay on ho attempt is it because of power control ,because the neighbour cell level is around -60 dbm,serving is around -85 with 1 quality,but the hand over attempt dosnot happen?

    #60689
    Firas
    Guest

    what is the vendor and what is the quality and level thresholds settings for the power control?

    #60690
    Bijoy
    Guest

    Hi GMN.
    Power budget HO doesn’t takes place when PC conditions are meeting.Try to set different triggering points for power budget Ho & PC and this wont happen.

    Br\\
    Bijoy

    #60691
    GMN
    Guest

    hi
    the vendor is ericsson and the setting is like this:
    ssdesup:92
    ssdesdl:92
    qdesup=30
    qdesdl=30
    lcomp:10
    qcomp:60

    with best regards///

    #60692
    Firas
    Guest

    this is what we have actually, and yes with the levels and quality in your case it is expected when you have power control

    #60693
    Taib
    Guest

    Hi Firas,
    Do you mean to say, that if the level/ quality are within the power control window, there will be no power budget HO attempt. pls reply because even in our network HO attempt gets delay even if the difference between serving & best nbr is more than 15db.

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.