Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

connecting equip. in TEMs inv.(ericsson)

Viewing 15 posts - 1 through 15 (of 19 total)
  • Author
    Posts
  • #60656
    natasha brin
    Guest

    hey guys

    i want test 2 network operators at same time using TEMs investigation v9.0.0, can i ??

    and how can i connect the 2 MSs and 2 GPSs and 2 HASP keys ?

    is the logfile recorded in this case will be 2 logfiles ?? or one ??

    i hope i showed the case in best way

    thnx a lot

    #60657
    hellboy
    Guest

    Hi,
    It is possible to connect two ms at the same time and with one gps and hasp key .And the log file rec wil be one.

    Regards
    hellboy

    #60658
    natasha brin
    Guest

    i tried to connect them but it said (license check failed)

    wat can i do ??

    #60659
    pc
    Guest

    hi brin
    If you have license to no of MS then you can, atlistno 2MS

    #60660
    natasha brin
    Guest

    hey pc

    wat u mean in this ??

    can u explain more pls ??

    #60661
    SHELDON
    Guest

    Hi Natasha,

    Yes, you can test 2 operators at the same time using TEMS Investigation 9.0.0. You need to connect two phones. Also, you may need to connect two dongles if you are using phones from different versions of TEMS Investigation. You need only one GPS, not two.

    The logfile recorded will be only one, but you can generate the report based on MS ( ie, MS1 or MS2).

    The error “LICENCE CHECK FAILED occurs when TEMS cannot detect the dongle. Are you using the same phone model? Does this error occur for both phones? Please answer these questions, so that I can see how to help you out.

    Regards,

    Sheldon

    #60662
    SHELDON
    Guest

    Dongle in my earlier post refers to the HASP key.

    #60663
    natasha brin
    Guest

    dear sir

    i have same phones
    sony ericsson z750i

    whenever i connect i have one phone connected and the other on said license check failed

    #60664
    pc
    Guest

    Hi brin
    You dont need 2 dongals at ones.the license should have the access to go the number of ms. plz check the licnse access

    #60665
    natasha brin
    Guest

    i tried with 1 dongle too

    but it still says license check failed

    how can i check the license access ?

    #60666
    SHELDON
    Guest

    Hi,

    Try this and see if it works:

    Go to:

    Start/Program files/Ericsson/TEMS Products/Utilities/TEMS Investigation HASP HL-SRM Key reader

    An interface will pop up, showing you the number of phonse you can use with the dongle and some other info.

    If you are able to see this, then try again. It should work.

    #60667
    pc
    Guest

    Hi brin
    They are sending the doc with tool.
    check it

    #60668
    natasha brin
    Guest

    which parameter should i see to know the number of phones ??

    #60669
    SHELDON
    Guest

    Hi Natasha,

    I think it’s the ” No.of Lic.”, but I’m not 100% sure on this.

    My motivation for asking you to go through that process was to make sure that your laptop could read the HASP software. If you could still not connect after reading the HASP, then your licence probably supports only one phone. In that case, you will need to connect two HASPs.

    Let me know the latest situation ( were you able to see the HASP information when you went through that process?)

    Regards,

    SHELDON

    #60670
    natasha brin
    Guest

    thnx for ur answers but i saw the HASP reader and it written No. of Lic. = 1 and i connected 2 HASPs too and i got the same result((license check failed))

Viewing 15 posts - 1 through 15 (of 19 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.