Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BA,MA list & DTX

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #60562
    harry
    Guest

    Hi friends , i have some questions plz answer them

    1. what is BA & MA list
    2. Diff. b/w blocking & congetion
    3. how DTX is related to RX QUAL.

    Thanks in advance

    #60563
    Dev
    Guest

    BA List is bsc allocation list,
    MA list is mobile allocation list

    in between which hoping occours.
    Blocking and congestion are same meaning,
    block means call disconnect and congestion means searching for vaccant channel .

    #60564
    Jason
    Guest

    Hello All;
    I also have some questions about BA lists. I see a active BA list and a idle BA list. The active BA list is for in calls, and the idle is for reselection. Here are my questions.
    1-We currently have all of the BCCH’s in the neighbor list in the active BA list. In the Idle list we have that plus the BCCH of the sector. Is this the standard? Does anyone else do this differently?
    2-What would the effects be if:
    a-the sectors BCCH was listed in the active list?
    b-the sectors BCCH was NOT in the idle BA list?

    Thanks for any response in advance.

    #60565
    Plannerguy
    Guest

    Hi

    In your case the BA List is similat to Neighbor list .That is why you have all frequency in BA List .

    If required you can Assign seperate BA list .

    Regards
    Plannerguy

    #60566
    Eagle
    Guest

    Hi

    a-the sectors BCCH was listed in the active list?

    You are just going to see the BCCH during drive testing. no impact on network

    #60567
    MF
    Guest

    Dear Jason,
    1, For active BA list it is recommended to delete all unnecessary BCCHs(only the BCCHs are needed which you have defined their Cell IDs as neighbor cells), because it cans easily affect HO success rate.
    2, For Idle BA list it is recommeneded to include all band(all available BCCHs including the BCCH of serving cell) in idle BA list, because it is definately helpful for cell selection process when an MS in switching ON.
    Thnak you
    MF

    #60568
    Hassen
    Guest

    What the meaning of BA list.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.