Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GSM/KPI

Viewing 15 posts - 1 through 15 (of 27 total)
  • Author
    Posts
  • #60351
    pc
    Guest

    How calculate the TCH accessibility.

    #60352
    Pc
    Guest

    How to calculate the TCH accessibility.pls help me any body.
    thank you.

    #60353
    Bijoy
    Guest

    What is your vendor?

    #60354
    Pc
    Guest

    Hi Bijoy
    Thats ZTE

    #60355
    Mak
    Guest

    In my point of view TCH accessibility is directly proportional to TCH blocking. As you improve the TCH blocking your TCH accessibility will improve

    #60356
    pc
    Guest

    Hi Mak
    Is there any equation to calculate the TCH blocking for ZTE

    #60357
    Paras
    Guest

    Hi,
    Formula for TCH blocking is :
    number of TCH seizure failure * 100 / number of TCH seizure attempt

    #60358
    Akramots
    Guest

    Hi all,
    It is not 100% true.
    There could be losses not only due to blocking (SDCCH, TCH, ABIS, A …) but also due to HW failure. For example: in case of cross connected Antennas between sectors, or one of TRX could be damaged.

    #60359
    Paras
    Guest

    Hi Akramots,

    that’s true, failure can be due to various reasons, but all these will come in failure part
    the formula i have given is a general formula

    #60360
    k. srinivasa Raju
    Guest

    Hi, Please give me tips for improving sd drop. ( Here we are using NOKIA system ) Mainly for overshooting cells what whould be the parameters that I need to look for…

    #60361
    Ahmed
    Guest

    please explain KPI in details to me?

    #60362
    Kamrul Hasan
    Guest

    NumTermCalls = ?

    #60363
    Prabeen
    Guest

    Hi Srinivasa,

    Is the Cells with high SD Drop a border Cell? Check out ur CRH value. Try to increase ur CRH value to 8 if not. This may reduce ur LU.

    But Bijoy,

    Could u explain me wat exactly is definition of TCh Blocking and SD Blocking. Wats teh difference btw Blocking, Congestion and drop.

    #60364
    srinivas
    Guest

    Hi Prabeen,
    Thanks for the suggestion. A small elaboration on CRH will be helpful. We use NOKIA system here and there is no results for CRF in NED..

    Please suggest.

    #60365
    KJB
    Guest

    Hi Sirnivas!

    CRH (Cell Reselect Hysteresis),You need to search HYS in NED.

    Default value is 4,Can be increases as per requirement.

    BR..
    KJB

Viewing 15 posts - 1 through 15 (of 27 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.