Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

12.2 K

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #60277
    JLNH
    Guest

    Using a 12.2Kbps codec, is it correct to assume the following?

    12.2 Kb/s * 60s = 732 Kb

    So an one minute call is the same as 732 Kb of data

    I have the felling something is wrong, Could someone help me with this.

    Thanks!

    #60278
    Pix
    Guest

    Hello jlnh,

    It is fine, don’t worry. A call does indeed need a constant 12.2kb/s (useful) throughput. The actual throughput on the air of a TS is above 22kbps, but that’s including all the “radio” protection around the useful signal. You shouldn’t be counting it.

    Just don’t forget that the timeslot has also a useful throughput capacity of 12.2kb/s and you have no reason to worry. I’m interested to know what you would do with such a figure ?

    If you want to compute the throughput the voice is going to use in an IP transmission network, then you should also add the headers and the related signalling (about +0.9kb/s per call).

    Regards,
    Pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.