[Bijoy]

You already helped them a lot dear.

[Mak]

HI Bijoy,

I think you can elaborate some more point on this discussion.

Thanks

[Bijoy]

Ok Mac
If you insist.
If you enable enhanced Dual Band,you will hve two parameters,namely
1.Incoming OL Subcell HO level Threshold(dB)
2.Outgoing OL Subcell HO level Threshold(dB)

Try this.

Br\\
Bijoy

[Mak]

Hi Bijoy,

Generally I have seen a dual band network like 900 band works as a BCCH and 1800 band as a TCH.

But here in the network of Huwaie both the band are working in BCCH and TCH.

We have a basic network over here.
NO hopping is used. No Amr is working. we don’t have enhanced dual band features. Overlay and underlay features are not working.

We are only using inter layer handovers. In which handover from 900 to 1800 are happening easily. But when MS takes the handover on 1800 it does not give the handover to 900 cell.

there is a one more interesting thing. We don’t have the continuous cells of 900 and 1800 band.

[Bijoy]

Ok MAC
Let me know the following parameter settings:
1.Inter-layer HO Threshold
2.Inter-layer HO Hysteresis
3.Adjacent Cell Inter-layer HO Hysteresis.

[John]

hi mak
would you please send me the document that AliAsgher sent to you i really need it please.

[mak]

hi jhon,

pls provide your mail id

[John]

hi mak
john198152@yahoo.com

[Mak]

Hi John,

I have mailed you the doc.

Thanks to AliAsgher.

[Jeff]

Hi Mak and Co.
is that document different from the one we get from LMT help??
To my understand the Huawei LMT help explains about each parameter. Just press F1 then search for the parameter.
Correct me if i’m wrong

[John]

thank you dear

[Faares]

oh , very interesting discussion is going on here ,

Mak Or john can any one of u send me those document. i need it too

thanks in advance
my email m_a_h2000@hotmail.com

[Author]

Posts