Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Traffic Measurement and calculation

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #34981
    Mahalingam
    Guest

    How do we calclulate the following
    for 5ESS Local Switch from Lucent and AXE-10 from Ericsson with reference to the ITU document
    ITU-T 600. What are the counters that should be taken to calculate offered by these switches.

    ITU-T Recommendation E.600
    2.13 Completion ratio
    2.14 Answer Seizure Ration(ASR)
    2.15 Answer bid ratio (ABR)

    #34982
    Naveed Shaikh
    Guest

    Dear Mahalingam
    1. the formula for calculating Call Completion Ratio is
    CCR= (CCS with answer(Out) + CCS Subs Busy+
    CCS Unanswered)/ Out going Call Seizure

    2.ASR(O.G)= CCS with Answer/Out
    going Call Seizure

    ASR(I.C)=CCS with Answer/Calls Carreied I.C

    i DONT KNOW THAT THESE FORMULAS ARE according to ITU documents or not but these formulas are being applied by the Big Telecom operator in pakistan for EWSD and Ax-10(ericsson) switches.

    I would like to know about ABR.
    I will be thankful if you can send me The ITU recomendation docs

    Naveed Shaikh
    MUET jamshoro
    Pakistan
    shaikh20@hyd.paknet.com.pk

    #34983
    Mahalingam
    Guest

    Dear Naveed,

    The ITU earlier known as (CCITT) documents are available here. The E600 is at

    http://www.mit.edu/afs/net.mit.edu/reference/ccitt/1992/e/e600.doc

    If u are working with AX-10 Ericsson switch, the command and the counter which are used for calculating these parameters will be of much help

    #34984
    Riyadh
    Guest

    can i use the following formula to calculate ASR ?

    ASR = Successful Calls / No. of bids. *100

    And, what are the possible reasons for lower or drop in ASR.

    And, what are the factors that can affect the ASR?

    #34985
    Imran
    Guest

    I want to know different strategies that need to bbe adopted to improve ASR in EWSD exchabges.
    I am working at OMC and EWSD transits are connected to different exchanges like E10-B ,Huawei ,ZTE ,Ericson
    I want to know how can I improve ASR in different direction.What should I look at .

    #34986
    zabin
    Guest

    how to calculate CER ? Please help me with the equation

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.