Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RTT delay

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #59770
    toto
    Guest

    Hi all,
    is there anybody to give us idea how to decrease the round trip time delay in Alcatel systems B10?
    And what are normal values for this(for GPRS or EDGE data)?We observed with ping values 500to1000ms?

    #59771
    Pix
    Guest

    Hi,

    What do you call RTT ? Can you give the method you use to calculate it ?

    Normally : you ping your GGSN many times, consecutively. The RTT is the ping delay in average, except the 1st ping (because there is TBF establishment).

    i’ll give you B10 average values tomorrow.

    #59772
    Rex
    Guest

    Hi,
    what is RTT average value for B9?
    How to improve (decrease) RTT ?
    Which interface causes mostly increasing (delaying) RTT?
    Vendor is Alcatel, release B9.
    Regards,

    #59773
    Rex
    Guest

    Anyone?
    What causes increasing of RTT?
    ex. ping with google is around 800ms, shouldn’t be less?

    #59774
    srinivasa raju
    Guest

    Can please anybody tell me how to decrease RTT delay.. The system we r using is NOKIA

    #59775
    VanG
    Guest

    Hi Raju,
    try to activate the Extended UL TBF feature and may be the RTT will decrease but you must expect increase of TBF UL drops

    #59776
    Bijoy
    Guest

    Raju
    What is your BS_CV_MAX?
    Check in “ZEGO;”
    Increase it to 9 and use the following settings,you will see improvement.

    00067 DL_TBF_RELEASE_DELAY 03E8 YES to 07D0
    00068 UL_TBF_RELEASE_DELAY 01F4 YES
    00071 UL_TBF_REL_DELAY_EXT 03E8 YES
    00072 UL_TBF_SCHED_RATE_EXT 0005 YES to 0004

    Br\\
    Bijoy

    #59777
    Srinivasa Raju
    Guest

    Dear Bijoy,
    Thanks a lot for the inputs that you have given.
    I will check the setting and will update you the same by doing the changes.

    Thanks,
    K. Srinivasa Raju

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.