Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

More HLR-IDs

  • This topic has 4 replies, 1 voice, and was last updated 21 years ago by Sunil Kumar.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #34972
    qazmlp
    Guest

    What is the significance of having more than one HLR-Id for a HLR ?

    #34973
    Prabhakar verma
    Guest

    Well to start with u can have 1 hlr and have 2 id .. then as subscription /traffic increases u can assign one of the id to another hlr without any major changes .Further more u can also assign them to mated pair

    #34974
    Sunil Kumar
    Guest

    Hello Mr.Prabhakar Verma,

    I am Sunil working in GSM-NSS-AXE10 Envirnment.

    If we assign TWO HLR IDs to one single HLR then How we have to do the migration of one of the HLR ID for a new HLR Node.

    I hope that you are working for AXE Switch.So I am expecting your reply soon.

    sunil_almnthat@yahoo.com

    Rgds

    Sunil

    #34975
    Prabhakar verma
    Guest

    Well to start ,u have to define the hlr with 2 own point codes X & Y.Then route say numbers say 0-4 to point code X and numbers say 5-9 to point code Y using either route on dpc or using gtrc towards the point codes.

    #34976
    Sunil Kumar
    Guest

    Hello Mr.Prabhakar Verma,

    Thanks for your reply.

    So when we want to put new HARDWARE, we can change the routing to the new HLR Node.

    Ok, Howmany SPs can we implement in AXE10 In international Format.

    Rgds

    Sunil

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.