[RNP2]

I have found from the neighbor stat that, there is no inter-BSC Handover triggerring from cell A to cell B (inter BSC HO attempt is zero from cell A to cell B for whole day..I checked several days).
But there are few attempts (inter BSC) from cell B to cell A.

I mean HO is happenning only in one way.

I have checked from the cell parameter that , neighbor relation is defined as a both way between cell A and cell B.

What should be the reason for this 1 way HO?
What I need to check? (There is no RF related problem as I checked.)
Prompt reply is highly appreciated.

[RNP2]

I found from the neighbor stat of another week that, there were HO trigger from cell A to cell B.

May be last week no neighbor stat has been collected from cell A to cell B.

[Pix]

Hello,

How many HO requests did you see in the past weeks, in both directions ?
If the figures are low, then I wouldn’t be surprised that sometimes there aren’t any HO.

What are the values of HO requests and HO successes ?

[RNP2]

thanks Pix for your reply.
Ya, the number of HO attempt is too low.
Per day less then 15 HO.Which is not normal.
The 2 cells are adjacent.Supposed to be more HO. As I also found from log file that cell B was the strongest neighbor when cell A was serving.
What is the cause for that less no of HO or sometimes no HO at all.
Your help will be appreciated.

[Author]

Posts