Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MAX PDCH and Thr Decrease!!

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #59235
    Spidey
    Guest

    Hi all, we performed MAX PDCH parameter Change on 3 cells and we observed thr decrease(out BH CS), is this normal behavior?? (ALcatel BSS)

    #59236
    pix
    Guest

    hi,

    what is thr decrease ? (the meaning ?)

    I work on ALU too, I never heard this before…

    #59237
    Spidey
    Guest

    we performed two Drive test measurements under the same BTS (3 cells) the first one on BH GPRS and the second one outside (away from BH CS) and the results are the following:

    – BH GPRS: FTP Thr Decrease by 50kbits/s!!! + increase of 1 TS usage!

    -BH CS: MCS9 usage decrease and HTTP Browsing Transfer Th decrease

    is this normal?

    #59238
    Pix
    Guest

    Yes, at the busy hour, the distribution of TCH, PDCH and GCH (on Abis) is very dynamic. The situations you are experiencing are normal, I think. Reducing the thr is a way to better share the resources with other users.

    cheers
    pix

    #59239
    Spidey
    Guest

    otherwise i think in normal situation with 1 user in the cell higher thr should be observed?

    #59240
    Pix
    Guest

    Yes.
    At BH, you will experience the worst thr possible (all resources are busy : radio timeslots, Abis, Ater, Gb, etc…)

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.