- This topic is empty.
-
Posts
-
I’m having Rx diversity lost alarm and anytime i work on it, it clears but comes back after a few days. What culd be the problem.
hi toby
Or diplexer fault or vswr and some time jumperFaultu TRU
did you test sectors with crossing equipments? (tru,cdu,feeder,antenna,rx jumps)
this alarm appears at least 50 minutes.
You might be missing RX antenna. Please u can see at OMT radion faults that u miss the RX antenna. if u attach antenna i hope alarm will go off.
Hi Toby,
do you have VSWR alarm too?I’ve checked the antenna and all of them are connected. I just changed the Rx diversity of the antenna to Azimuth and the alarm cleared.
I’m hoping it wont come back cos the only option i feel i have now is to change the CXU.Rx Diversity lost code
do a test call around and check maybe you’ll pickup the wrong bcch on the wrong sector.. then rewire or redo jumpers
Check / change the RX cables, may be with another sector, so that when the alarm comes in again, you know why.
Remake the connectors at jumpers and feeders at both ends.
change the RX cable from sector to another sector and try to remake sure connector and jumper to Remove VSWR alarm
It was the CXU…I changed the CXU and the fault cleared permanently…
I’ve been having Rx diversity problem with similar problem where DTRU,CDU,Feeder,Jumpers have been changed but still the alarm exit…Need help.
Dear sir,
I am facing the problem of antenna branch alarm-Branch-B in all sectors.
It was found vswr values normal then also vswr alarms are pinging in my 10 sites on ericsson 3g RNS6202.
Kindly guide me for alarm removal.how can get site coverage
- The forum ‘Telecom Design’ is closed to new topics and replies.
