Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Paging method selection

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #58926
    Tima
    Guest

    Hi all,

    on MSC we can choose different paging methods, when we define BSC data:
    CGI = CI + LAC + MNC + MCC
    CLI = CI + LAC
    LAI = LAC + MNC + MCC
    LAC = LAC
    ALL = ALL CELLS IN BSC

    question is, what is the best method to optimize (decrease)signalling load of the network?

    Thanks in advance

    by the way, it’s Nokia MSC

    #58927
    krish
    Guest

    hi,

    Is it? Paging method means imsi,tmsi selection .if i am wrong plz give suggetion.

    #58928
    Mik
    Guest

    Hello!
    As pointed in NED “The LAC or LAI paging method is recommended because it produces less signalling load between the MSC and the BSC than other paging methods. LAI method is used if radio network configuration of the MSC/MSS contains several PLMNs.”

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.