Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

feeders swap

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #58886
    amkam
    Guest

    whats the relationship between swap feeders/swap sectors and the MS TX power ?

    #58887
    Pix
    Guest

    Amkam,

    There is no direct link… Well, there is a link, but it’s strange to think about that.

    Swap feeders means that the Rx and RxDiv are not oriented in the same direction. Therefore the UL diversity gain is lost : MS has to emit with a stronger power.

    Swap sectors : no impact on MS power, except … well, you could say that the MS has to emit stronger, because the frequency is more interfered –> C/I is bad –> MS must emit stronger to fight the UL interference.

    #58888
    Bijoy
    Guest

    It is not clear whether he is talking about swap sectors or swap of TX/Rx between sectors.
    In the latter case also,looking at the MS TX pwr ,you cant conclude anything as such

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.