- This topic has 12 replies, 1 voice, and was last updated 2 years, 9 months ago by omaaaru.
15th September 2009 at 07:05 #58850RF BeginerGuest
Anyone with the idea of how to play around Huawei BSC 6000 LMT changing the TRX Power??
Please support.15th September 2009 at 08:09 #58851m12Guest
Take a look at the TRX parameters named “Power Level”.
It specifies the transmit power level of the TRX (range 0-13/0-10 depending on BTS type, with 0 –> maximum power and an increase of 1 corresponds to a 2 dB transmit power reduction).
m12.15th September 2009 at 08:10 #58852BijoyGuest
Power Level specifies the transmit power level of the TRX. The greater this parameter is, the smaller the transmit power is.
When this parameter is set to 0, the transmit power level of the TRX is the greatest. Each time this parameter increases by one level, the transmit power reduces by 2 dB.16th September 2009 at 04:59 #58853JacubsGuest
I think the parameter name is “TRX Static Power Class”
Jacubs18th September 2009 at 12:19 #58854ALEX_RGuest
you can change it from TRX Config—– Device attributes—– power level
max output power from Huawei BTS is 60W in BTS3012, BTS3012AE, BTS3900, BTS3900C27th January 2010 at 10:50 #58855TonyGuest
Can you let me know what does mean by following data:
Cell Name XY66781
The Cell names shows site id is 6678 and 1 is cell A.
But what about others?27th January 2010 at 17:44 #58856PixGuest
MAIO is usually defined per TRX, so ust one value “6” is weird.
HFS : it is the list of frequencies on which the TRX is hopping. Each TDMA Frame, the 8 consecutive TS are using another frequency from the list.
MAIO = 6 means the TRX starts the hop sequence at the 6th frequency in the list (= 22). The start = when the cell is turned on. Point is that each TRX in the cell should use a different MAIO, so that the TRXs are always using a different frequency (because they are all synchro and using the same HFS, in the same order).
The “order” I am talking about is called “HSN”.18th October 2010 at 15:26 #58857MarielGuest
I was wondering what the output power of DRFUs or GFRUs in a Huawei 3900 BTS is when it is fully configured.
Thanks!9th May 2017 at 10:43 #58858Tijo augustineGuest
FDD IN INDIA HOW MUCH TRX OUT PUT POWER GIVEN BY BTS10th May 2017 at 09:21 #58859LEMAUREGuest
Hello Tijo augustine!
TRX output power depend on the type of radios used (RRU or RFU) and also the version (MRFUv2, MRFUd, …)
Moreover, it is also recommended to have the same output power across all TRX meaning that the TX ouput will also depend on the cell configuration.16th October 2017 at 21:00 #58860Sumit KashyapGuest
How we decide the TRX GROUP ID while configuring EGTBS TRX in Huawei.17th October 2017 at 17:06 #58861LEMAUREGuest
any as long as it is not yet used by another one25th February 2018 at 12:34 #58862omaaaruGuest
any one help huawei eGBTS commans (GSM)
like: DPS TRXPWR etc.