Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Site Rehoming Steps

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #58322
    dheep
    Guest

    whats are the necessary steps to be followed during site rehoming in bss & radio point of view?

    #58323
    JRAMOS
    Guest

    Hello,

    The steps for do a site rehoming, from Old BSC to New BSC.

    STOP ALL MEASUREMENTS (MRR, MTR)

    1. BSM Adjustment
    2. CNA Adjustment
    3. Tests of drive test will be good, and do not have to present errors in the network. The drive test will be doing before start the rehome.
    4. Test the new medium of transmission, DIPs in new BSC.
    5. Print all the alarms in both BSCs, if the BTSs had an external or internal alarm when you finished the rehome these alarms appear in the new BSC.
    6. Delete Managed Objects (MOs) in old BSC
    7. Rehome of cells thru CNA
    8. Create Managed Objects (MOs) in new BSC
    9. Load and put in service the BTS, check the alarms. (Step 5)
    10. Start a new drive test

    Thx.

    #58324
    msa
    Guest

    hi send to me ur e-mail i have swap through OSS procedures

    #58325
    dheep
    Guest
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.