Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SS7 doubts

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #58267
    jakz
    Guest

    What do u mean by cgr in a linkset,how it is calculated,how many timeslots are there in a lsl signaling,what do u mean by 4096 circuitz.

    plz explain
    nokia techies

    #58268
    shadi
    Guest

    i would to be a good engoneer

    #58269
    Ronny
    Guest

    One time slot will be used for one LSL & at maximum 16 LSL can be created between same OPC & DPC.

    In ISUP protocol there are 16 bits reserved for CIC ( circuit identification code)
    Lower 5 bits will identify 32 timeslots in a E1
    Next Higher seven will indentify E1 number

    Next higher 4 bits are reserve

    If 5 bits are 11111 -> 32
    If 7 bits are 1111111 -> 128

    128*32 —-> 4096 time slots or CIC in a trunk group between OPC & DPC

    #58270
    Wallis Dudhnath
    Guest

    16 LSLs due to the SLS balancing algorithm. This is a four bit flag.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.