Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2 LACs in the same BSC

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #58221
    ETS..
    Guest

    Hi guys
    If these are 2 LACs in one BSC, which kind of handover happens beween two cells (LAC 1 & LAC 2). Both of cell are inlcuded to the same BSC.

    #58222
    Pix
    Guest

    it is a intercell internal HO.
    only when the call is released, the MS will perform a LU.

    #58223
    ETS..
    Guest

    Thanks a lot

    #58224
    krish
    Guest

    hi,

    If i have two different bsc and they belongs to different msc then what will happen abt lu and if they belongs to same msc then what?

    #58225
    Pix
    Guest

    the location update is going up to the HLR. So the target MSC (new MSC after cell reselection) will simply inform the HLR about the change of LAC.

    The HLR is global, there is one HLR database (virtually, not talking about servers or duplicates) for the whole network.

    Cheers,
    Pix

    #58226
    loon
    Guest

    we have problem with deleting subcribers from VLR ZTE manually by command delete user data and that is due to when sub moves from one MSC huawei to MSC zte so when i query sub data from HLR we found out that sub still holding the MSC huawei while sub moves to new LAC for MSC ZTE

    #58227
    Ayat
    Guest

    Hello,

    in our network we have

    2 location area with one ID in different MSC

    for example we hace LAC code 2333 in MSC1 and MSC 2 ?

    could you explain ?

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.