Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Directed Retry Paramters

Viewing 6 posts - 31 through 36 (of 36 total)
  • Author
    Posts
  • #58139
    Fresh Opt
    Guest

    Thanks Pix,
    but, if we enable Fast Traffic HO, will that increase incomming HO failure due to congestion on those cells with congestion, hence, bad KPI regarding HO. Am I correct?
    Regards,

    #58140
    Pix
    Guest

    Yes, if the candidate target is congested, the fast traffic ho will fail due to congestion.

    But I must disagree with you : the HO inc fail due to congestion is NOT a KPI !!

    HO congestion means the BSC detects a HO, and check for available candidate. If it doesn’t find the candidate is congested, what is actually the impact for the subscriber ? Not being able to setup the call ? So it is as if fast traffic HO is disabled… >> call setup fails.
    But sometimes, the BSC finds a candidate with a free TCH >> call setup succeeds.

    Altogether, you increaase the probability of call setup success, even though you artificially increse the inc HO congestion.

    The KPI for HO is actually “outgoing HO execution success rate”, which doesn’t take into account congestion failures.

    Cheers,
    pix

    #58141
    Rex
    Guest

    Hi,
    What is difference between Directed Retry and Forced Directed Retry (Alcatel). And wich is the order of triggering, directed retry, forced directed retry, fast traffic ho or other way (if we have all features enabled)? Waiting for your response.
    Regards,
    Rex

    #58142
    Pix
    Guest

    DR = HO from sdcch to tch, detected with a standard HO algorithm (could be poor quality, low level, long distance, power budget, etc)

    FDR = ho from sdcch to tch, detected thanks to a specific “capture-style” algorithm:
    if DL_RXLEV(n) > L_RXLEV_NCELL_DR(n) and number of free TCH in n > FREELEVEL_DR(n), then the MS is sent to “n”.

    The order of detection… DR is actually a mix of different causes, so if DR is detected on Emergency algo, it has high priority. If it is detected with PBGT algo, then it has the same priority as the cause 12.

    FDR and fast traffic HO have less priority than cause 12. But the priority is no really important here : DR doesn’t happen much, while FDR and FTH are more easily triggered.

    Cheers,
    Pix

    Best regards,

    #58143
    manjunath
    Guest

    Hi i want to know how Directed retry will work in BSC wat is the process

    #58144
    Sud
    Guest

    MS, MO, HSN, what is the role in a cell. Plz explain .

Viewing 6 posts - 31 through 36 (of 36 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.