Generic selectors
Exact matches only
Search in title
Search in content

RF Loop test fault in Ericsson RBS2206

Viewing 15 posts - 16 through 30 (of 31 total)
  • Author
    Posts
  • #57616 Reply
    Abhilash
    Guest

    Last option left is to check feeder connection at the antenna end. Do you see any alarm other than this in that particular sector???? any diversity related alarms?????

    #57617 Reply
    nms
    Guest

    i have the same faule and the replacement unit mentioned is the RBS itself

    #57618 Reply
    Bin
    Guest

    I have a problem “RF loop test fault” with RBS2206 and one TRX was blocked. I’ve replaced dTRU, DXU, Y-link, Rx & Tx cable, but the problem still not resolved yet.
    Does anyone know the principle of “RF loop test”? so we can know which part of RBS is damaged.

    Thanks!

    #57619 Reply
    Dieudonné
    Guest

    I have liked configure connection BSC/TRC-MWG-MSC Ericson. Can you help me.

    Information

    BSC/TRC:SP=3-7000
    MGW:SP=3-3000
    MSC:SP=3-4000

    Using this DIP for the signalling

    34RAL2 RALT2-1088&&-1194
    35RAL2 RALT2-1120&&-1515
    36RAL2 RALT2-1152&&-1836
    37RAL2 RALT2-1184&&-2157
    38RAL2 RALT2-1216&&-2478
    39RAL2 RALT2-1248&&-1279

    Thank you.

    Best regards

    #57620 Reply
    Dmitriy
    Guest

    I have the same problem – RF loop test with RBS 2206 on cell C. I have replaced dTRU, CDU, CXU, DXU,Y-link, Tx-Rx cables, CDU-bus. Cheked IDB. VSWR is normal, but no results.

    Help!

    #57621 Reply
    marimuthupandian
    Guest

    Rf loop test fault rectify solution .1, faulty card change the sector .2, change the remote area

    #57622 Reply
    vikas
    Guest

    plzz follow some points….

    1.swap the feeders of A sector with B sector.then see fault moves in B sector or still in A sector.

    2.if fault moves in B sector then there is problem in the upper part means may be jumper,feeder,anteena.

    3.do this then tell me…

    #57623 Reply
    ferdinand
    Guest

    i have challanging task, i am working on RBS2206 WHEN FEEDER CABLE disconnected DTRU fail to detect still work on operatonal.what is the cause, is it fault?

    #57624 Reply
    jamil
    Guest

    Dear ferdinand
    The RBS still transmit the frequency

    #57625 Reply
    francis nyarkoh
    Guest

    I have a problem “RF loop test fault” with RBS2206 and one TRX was blocked. I’ve replaced dTRU, DXU, Y-link, Rx & Tx cable, but the problem still not resolved yet.
    Does anyone know the principle of “RF loop test”? so we can know which part of RBS is damaged.
    Please help..

    #57626 Reply
    FRANCIS NYARKOH
    Guest

    I HAVE CHANGE THE JUMPERS GOING TO THE ANTENNA, WITHIN TWO WEEKS NOW THE FAULT HAS NOT APPEAR.THANKS GUYS…

    #57627 Reply
    MNA
    Guest

    I am a field maintenance technician,i work on Traffic node and RBS.I have one problem;in our BSC i have remarked that three TRXs have blocked for one site.i checked in that site there is no alarm in the RBS but from the BSC the 3 trxs are still blocked.Please i need a help to resolve this problem.

    Thank you and best regards!

    #57628 Reply
    jamil
    Guest

    hi MNA did you see the alarm list at EM and did you chick the VSWR

    #57629 Reply
    francis damtse-nyarkoh
    Guest

    Im using a tri- band antenna for all the 3 sector but sector 1 antenna was faulty and i replace it, after the replacement that sector is not picking traffic,I check the connections from top i release that there was a swap in the jumper connections,I have corrected that but still the sector is not picking traffic.Please I need help.

    #57630 Reply
    jamil
    Guest

    hi francis damtse
    2G OR 3G SECTOR you still have problem in feeder chick the jumper againj

Viewing 15 posts - 16 through 30 (of 31 total)
Reply To: Reply #57621 in RF Loop test fault in Ericsson RBS2206
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">