Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Power control

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #56996
    Naseer
    Guest

    what is the reason of down link power control not working.
    I found a cell where down link power control is not working. BTS is always transmitting the maximum power for the Hopping carriers.
    Paramters have been checked and Ok.
    What can be the other reason???

    #56997
    Naseer
    Guest

    any one face that problem?

    #56998
    positive telco
    Guest

    Have you check enable power control in RNC stting

    #56999
    Naseer
    Guest

    yes, that parameter is enabled. I have checked it.

    #57000
    Naseer
    Guest

    All the parameters are okay for that cell and are in consistant with other cells where power control is working.
    So what are the others reason which is making downlink power control not working for that cell??
    Please help!!!

    #57001
    Pix
    Guest

    Naseer,

    Well, it’s probably a software bug ! Have you tried resetting the cell ?

    You’re saying it yourself : Everything is the same as other cells, yet it’s not working. So it can only be a bug 🙂

    Just as a reminder, DL PC cannot work on the 1st TRX of the cell (or more precisely, all timeslots carried on the BCCH frequency)

    #57002
    Naseer
    Guest

    thanks Pix.
    Few cells(all these cells are recently came on air) have this problem.
    I was talking abt the hopping(non-BCCH) TRX.
    thanks.

    #57003
    Pix
    Guest

    Recent cells = recent bugs 🙂 Look, except parameters, what could prevent PC to work ?

    Nothing. Except a bug…

    Perhaps, you can take a double look at the parameters, are you really sure they are all identical ?

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.