Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Alcatel dual band

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #56808
    Alex
    Guest

    Hi
    What is the parameter that balance traffic between 900 and 1800 and the threshold for BR9

    #56809
    TNS
    Guest

    Check cause 10, cause 11, cause 13…
    BR

    #56810
    Alex
    Guest

    TNS
    Iam really new in Alcatel can you please help me more i donot know cause

    #56811
    TNS
    Guest

    Every reason to do HO have a specific name “cause XX”, where XX is a number.
    You will need a reference guide, where all causes are described.

    RxLev_DL(UL)_Zone
    Zone_HO_Hyst_DL(UL)
    Offset_HO_Margin_Inner
    MS_TxPwr_Max
    BS_TxPwr_Max

    BR,

    #56812
    TNS
    Guest

    and
    MS_TxPwr_Max_Inner
    BS_TxPwr_Max_Inner
    of course

    BR

    #56813
    Alex
    Guest

    Thanks TNS for your help i have one problem already some site been swapped from alcatel to huawei and the HO from Huawei to alacatel is not good but vise versa is Ok can you help

    #56814
    TNS
    Guest

    Hi, Alex.

    I’m sorry but I don’t have any idea about Huawei…
    What kind of problem…
    What is the average Inc HO success rate?

    BR,

    #56815
    Alex
    Guest

    Hi RNS
    around 10% as been checked the problem coming from RCP can you please give me some function of RCP.

    #56816
    dady
    Guest

    hello
    Iam new also in alcatel i have some cell let say with configuration 4 TRXs 3 TRX HR is active i want to active the fourth one what parameter i should send for BSS to activated.
    best for all

Viewing 9 posts - 1 through 9 (of 9 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.