Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Transparency

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #56777
    bagwell
    Guest

    Could anyone tell me what the meaning of transparency is in terms of telecommunications. For example a tranparent circuit.

    #56778
    Pan
    Guest

    Dear, bagwell!
    Usually, transparency is upper layers information transfer without any analyzing or changing of it by lower layers.

    #56779
    Pix
    Guest

    A circuit is always transparent, isn’t it ? It just transports data from one end to another end..

    (until quantum theory kicks in that is…)

    An equipment, such as a router for example, is just transferring data from one cable to another, therefore it is transparent to the information contained in the IP Packet.

    in telecommunications, the BSC is tranparently transferring some data from BTS to MSC (voice packets, for example, are not analyzed by the BSC), while analyzing some others (measurements results from the BTS are gathered by BSC, and are not sent to the MSC).

    Regards…
    pix

    #56780
    Innova
    Guest

    If a circuit mean a cable I guess it is transparent, only 0 and 1 and never altered. But if a circuit include network element then transparency should mean data carried over it is not affected and can be reconstructed exactly the same form. Is not filtered or packetized such that data could not be reconstructed properly. Normally all network element has a role to play when data is sent to them and before sending out to transmission media, otherwise many vendors will be out of customers. And Cisco will sure be a small company.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.