Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High SL load

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #56740
    Farkhat
    Guest

    Hi all.
    We experience high signaling load on NOKIA BSC with 1200erl traffic on BH – 0,35 erl on SL. We have 16 SL (64K), so LS expansion is not aplicable. We tested High capacity SL feature and sigtran, but this solutions are optional and licenses are very expensive.
    E/// BSCs with same traffic have less signaling traffic. So my idea is that NOKIA part of the network is not fully optimized.
    Do you have ideas how to reduce signaling load?
    Thanks 😉

    #56741
    Bhupendra
    Guest

    Hi Farkhat,

    No need to go for HSL; What u can do is just create another internal Point Code in BSC & in MSC; now u can create another 16 SL between thses two to reduce the sugnalling load.

    BR//
    Bhupendra

    #56742
    Farkhat
    Guest

    Ok, then some questions
    1.How are U organise load sharing?
    2. On which level – SCCP?
    3. What vendor do U use?

    #56743
    Farkhat
    Guest

    Does anybody modify default CCS7 LEVEL 3 & CCS7 NETWORK SPECIFIC PARAMETERS (ZNMI,ZNMO) parameters?

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.