Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

channel mode unacceptable

  • This topic has 1 reply, 1 voice, and was last updated 15 years ago by Michele.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 6th April 2009 at 06:49 #56733
    radiated
    Guest

    Hi,

    can anyone tell when do we get handover failures with cause “channel mode unacceptable” ,cause value 9

    6th April 2009 at 15:10 #56734
    Michele
    Guest

    Probably MS receive an Handover Command containing a wrong Multirate Configuration IE. The problem is into the BSC that probably try to open a channel not compliant with the MS capability.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.