Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ericsson bss commands

Viewing 15 posts - 61 through 75 (of 103 total)
  • Author
    Posts
  • #56658
    gaber
    Guest

    Hiii Master,
    Can anybody tell me how can I find and learn the commands function in ericsson?

    #56659
    Raz
    Guest

    Gaber you can have all you want in the Ericsson documentation . it is called ALEX.

    #56660
    Fizey
    Guest

    Can anyone tell me if there is a command on bsc to get data of all cells connected (serial number of trx and dux’s)

    #56661
    pix
    Guest

    hi,

    probably RXMOP:MOTY=xxxx, ALL; or something like this. I can give you the detailed (correct) answer tomorrow 🙂

    #56662
    pix
    Guest

    hi,

    i only found the serial number by using the BSM (base station manager). I guess you can get it with the AXE command “hwiprint” too, but i’m didn’t try.

    cheers
    pix

    #56663
    Mr 1 2 Know
    Guest

    Hie all,
    1) Is there any commands that can show if the site(s) was equip with EDGE or GPRS services?
    2) How to check total of GBL(link) equip to RNC?
    3) Is there any setting for MMS at site or RNC can be set so it can be send out much faster, as I am facing slow MMS throughout-put although less user at site.

    #56664
    kella kashi viswanath
    Guest

    Hi I need the brief discriptio for the command

    C7CTI in winfiol.

    #56665
    Mr 1 2 Know
    Guest

    Is there any command can be use to reset GSM (2G)sites?

    #56666
    SOSTE
    Guest

    Hi friends !This is commands for verify GPRS /EDGE: RLGSP:CELL=CNQ3121;

    #56667
    J18
    Guest

    Hi Mr 1 2 Know;
    for reset sites(2G)
    halted site: rlstc:cell=
    block MO: rxbli:mo=
    out service:rxese:mo=
    in service:rxesi
    déblock :rxble
    active site: rlstc

    #56668
    Mr 1 2 Know
    Guest

    Hie all,
    I wish to know if there is any commands that can view SIU IP at GSM site (stand alone site). I’m facing difficulties to reset SIU at GSM site because I don’t have @ can’t get the IP from OS, compare to 3G SIU IP i can view from citrix.

    #56669
    Mr 1 2 Know
    Guest

    Hie all,can any one help me on how to clear SIU alarm as below?..SIU reset done but this alarm keep on appear at SIU. What actually causing this situation?..pls help

    OSmon> getalarmlist
    STN=0,Synchronization=0;
    alarmId= 2;
    eventTime= 2013-04-01 T04:28:04;
    eventType= “communicationsAlarm(2)”;
    perceivedSeverity= “warning(4)”;
    probableCause= “x733LossOfSignal(329)”;
    specificProblem= “No Calibration from Time Server”;
    additionalText= “Timing quality too bad or missing time server.”;

    #56670
    bert
    Guest

    Use alex ,but the cmd to find the steriel nmr etc fort the trx’s is rxmfp

    #56671
    BELKREDIM
    Guest

    SGSN and GGSN (Gn/Gp) is broken.

    #56672
    secka
    Guest

    I need one commande to check the bandwith allocate by the BSC to one site on EI over IP.

Viewing 15 posts - 61 through 75 (of 103 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.