Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NSN Abis-Edge

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #56585
    Bhupendra
    Guest

    Dear All,
    in NSN they use EDAP time slots in Abis interface. my query is suppose i m having two BTS sites with 2/2/2 TRX confg; want to use EDGE also, can i use one Abis for carrying traffic of thses two BTS sites? How?

    #56586
    Farkhat
    Guest

    BTS with 2/2/2 means about 14-15 TS, depending on TRXsig and OMUsig size. So it will be 28-30 TS on E1 for both BTS,
    so you will have 3 TS for EDAP at most

    #56587
    Bhupendra
    Guest

    Thanx Frakhat,

    So,
    1. could these timeslots be used by both the BTS sites & on what basis?

    2. say 3 TS are left for EDAP, is it means we have 192Kbps bandwidth which these two BTS will use?

    #56588
    Farkhat
    Guest

    1. No, only 1 BTS can use one EDAP field, 3 TS in your case. You should define that EDAP in BTS manager and create EDAP on BSC (ZESE) and attach it to TRX. Read NED
    2. Not really. That only means that subscribers going to use EGRPS from this BTS with EDAP will share those 3 TS. And the actual bitrate depends on quality, cell load, EDAP utilization…

    #56589
    ankit limbasiya
    Guest

    how bts working

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.