- This topic has 6 replies, 1 voice, and was last updated 9 years, 9 months ago by Pinku.
27th March 2009 at 18:18 #56511HuNiGuest
what should be the standard message when ever MS tries to Location update on competitors network.
# 11: PLMN not allowed;
# 12: Location Area not allowed; or
# 13: Roaming not allowed in this location area.
Thanx in Advance27th March 2009 at 18:38 #56512PixGuest
Usually the MS is allowed to go in competitor’s network.
If it isn’t, then i’d say it’s probably cause 11. Pan can certainly help here…
PAAAAAAAaaaaaaAAAAAANNNnnnn, where r u when we need u ?27th March 2009 at 18:42 #56513HuNiGuest
Here the LU reject message is #12.
and when this happens our customers need to switch MS off and on again to camp on to our network.27th March 2009 at 20:19 #56514PixGuest
And that happens on whatever phone’s brand ?
Is there a mix of 2G and 3G coverages ?
Normally, in idle mode, the MS is not controlled by the network, and the only cause of a problem *should* be a wrong software in the MS.
But really, i don’t know more than that, sorry.28th March 2009 at 05:48 #56515PanGuest
Thank you, Pix 🙂
Dear, HuNi! There are some types of subscription restriction:
1) on basis of VPLMN restriction in the Home PLMN (HLR) (# 11: PLMN not allowed);
2) on basis of regional subscription restriction (RS zone numbers are administered in VPLMN and restricted in HPLMN) (# 12: Location Area not allowed);
3)National roaming restrictions in VPLMN only. It is possible total (global) national PLMN restriction or partial (local) – on per LA basis (# 13: Roaming not allowed in this location area and probably # 11: PLMN not allowed when restriction is global).
So, when your subscriber receives #12 it is most likely matches to the ‘2)’ case (in standard case). Further, MS stores the forbidden LAI in a list of “forbidden LA” and enters the limited service state (only emergency calls allowed) until it moves to another LA which is not forbidden. List of “forbidden LA” is cleared after switch off/on manipulations.28th March 2009 at 14:15 #56516HuNiGuest
Thanx PIX and PAN11th August 2011 at 14:38 #56517PinkuGuest
What is the cause code number when the error code is UDV (unexpected data value). How the handset behave with this error code and which doc to follow the details of this error code.