Home » Topics » Telecom Design » Basics of TRAU Planning
This topic has 10 replies, 1 voice, and was last updated 15 years ago by MKT .
Manu Katyal Guest
Hi All,
I want to know the basics of TRAU Planning.
Plz help
Thanks in advance.
Manu
Pix Guest
Hello,
What is a TRAU? = TRX ?
paraHO Guest
See GSM 08.60 and 08.61
Transcode/Rate and Adaption Unit
Pix Guest
ParaHO … I knew that 🙂 But in this case, you don’t plan “TRAU”. I guess he has a different definition for TRAU…??
paraHO Guest
Pix I knew you knew that :))))
I just wanted to make sure Manu TRAU was the same as the TRAU I thinking and why I showed standards.
MKT Guest
Hi,
“TRAU doesn’t need any planning”
Is it really true?
Then why does you need planning for a BTS?
I mean..why do you need to plan the NUMBER of TRX?
In the same way I think you need to “calculate” or “plan” the NUMBER of TRANSCODERS needed for a BSC.
MAY BE ERLANG CALCULATIONS!!
Regards
Pix Guest
ParaHO,
I knew you knew i knew, but i wanted to see how far it’d go.
MKT,
Yes. So, the question is actually how to dimension the number of TRAU. Well, it’s very simple, and yes, it should be base on the erlang : 1 TRAU = xxx Erlangs
and the BSC = xxxx Erlangs
–> How many TRAU needed to carry the BSC Erlangs.
paraHO Guest
Pix said: “ParaHO, I knew you knew i knew, but i wanted to see how far it’d go.”
I’m glad you knew that i knew that you knew what you know, because i knew it. Hope this did not give you a TRAU-mer :))))
Manu Katyal Guest
I think PIX has some ego problem or what???
Pix Guest
Pix has no problem of ego, because he’s not human. He’s hot, though.
MKT Guest
Pix has got high sense of humor, don’t take it otherwise.
Regards
MKT
The forum ‘Telecom Design’ is closed to new topics and replies.