Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BER-FER-RxQual

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • #56426
    Mehrnoush Farzingohar
    Guest

    what the difference between RXQUAL measured by drive test and RXQUAL measured by KPI?

    #56427
    pix
    Guest

    hi,

    it is the same…
    the one from drive test is related only to one call, and only to the DL direction.
    the KPI is an average for all calls in the cell, and is available for UL and for DL (independantly)

    cheers
    pix

    #56428
    bala
    Guest

    Hi All,
    i have doubt in RxQual measuring in GPRS case, Actually In Packet Downlink Ack/Nack MS sends RXQUAL to BTS. i mean to say this RXQual is related to downlink only. how to calculate thr Uplink RxQual and What is the maximum threshold level for cell selection in case of RxQual.

    Please give me a response.

    regards., bala

    #56429
    pix
    Guest

    hi,

    the ul rxqual is measured by the BTS, and sent to the BSC/MFS only if NC2 is activated.

    as far as i know, the RXQUAL collected statistically by the BSS are only coming from voice calls, not from packet transfers.

    during drive test, you can NEVER know about the UL link (rxlev ul, rxqual ul, etc) unless you set up your OMCR so that it collect UL information for the drivetest IMSI.
    this way, after the trace, you can aggregate DL measurements from the DT tool and UL measurements from the OMCR trace.

    regards.
    pix

    #56430
    Ayat
    Guest

    Hello all

    I am trying to calculate BER ,, and i have read from the internet i can get it by RXQUL as below

    Number of samples with UL RQ = 1 24,558.00
    Number of samples with UL RQ = 2 28,826.00
    Number of samples with UL RQ = 3 32,763.00
    Number of samples with UL RQ = 0 590,100.00
    Number of samples with UL RQ = 4 27,853.00
    Number of samples with UL RQ = 5 23,033.00
    Number of samples with UL RQ = 6 7,481.00
    Number of samples with UL RQ = 7 808
    Number of samples with DL RQ = 0 526,009.00
    Number of samples with DL RQ = 1 39,465.00
    Number of samples with DL RQ = 2 44,838.00
    Number of samples with DL RQ = 3 45,060.00
    Number of samples with DL RQ = 4 33,749.00
    Number of samples with DL RQ = 5 22,477.00
    Number of samples with DL RQ = 6 16,417.00
    Number of samples with DL RQ = 7 7,407.00
    these data for one cell one day

    how I can calculate it , and be infrom this data for TCH and SDCCH . could you explain how i get it from these daya ??

    #56431
    pix
    Guest

    ayat, email sent.

    #56432
    Ayat
    Guest

    Thanks a lot pix

    got it

    you are avaliable everywhere .

Viewing 7 posts - 16 through 22 (of 22 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.