Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TRX calculation

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #56303
    sam
    Guest

    Hi pix,
    In one cell (3TRX) I have over 60% tch congestion. I want to increase the trx. Is there having any formula for excel to calculate required trx to overcome from this congestion please?

    BR//
    Sam

    #56304
    pix
    Guest

    hi sam,

    you could look at the erlang table to find out how much capacity you should have.

    3 TRX = 21 channels capa
    erlangB(21 channels, 60% cong) = 51 erlangs of incoming ‘offered’ traffic

    you should have enough capacity to welcome 51 erlangs @ 2%
    Erlang B (51 erl, 2% cong) = 62 channels

    that’s about 9 TRXs

    now, you have to take into account call repetition.. if each user tries to connect 3 times for one call, the actual cong% is only 20%.
    –> 22.8 erlangs offered
    –> you need 4.5 TRX.

    Basically, you need 4 TRX with HR activated, or at least 5 TRX in FR.

    #56305
    sam
    Guest

    Thanks pix. Thank you very much.

    #56306
    Pix
    Guest

    Just to be clear, i assume a call repetition = 3, but that’s not a parameter. It’s a subscriber behaviour.

    It might be more or less important, i don’t know 🙂

    #56307
    Gerald
    Guest

    SDCCH accessibility =

    Number of SDCCH Success/ (Total Number of SDCCH Attempt – Not defined)

    #56308
    MOJI
    Guest

    Dear Pix.
    would u please share your formula to calculate erlangB(170 channels, 50% cong) =???
    thanx

    #56309
    AKS
    Guest

    Pl told me – how TRX capacity calculated????

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.