Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

sample per neighbor

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #55871
    Bob
    Guest

    Dears
    Any one know what is the acceptable sample per neighbor for making good handover per cell.

    #55872
    Pix
    Guest

    What do you mean by “sample” ?

    #55873
    Kamal
    Guest

    There is no parameter like sample related to handover….

    #55874
    Bob
    Guest

    Dear
    this is not parameter but as you know when MS make measurement on SACCH multiframe ( 100 TDMA frame) on the basis for this measurement left say 20 neighbor in BA list each neighbor take 5 sample is this enough for proper measurement this is that my meaning

    #55875
    Pix
    Guest

    bob,

    4 samples for emergency HO (or more)
    8 samples for better conditions HO (or more)

    #55876
    Bob
    Guest

    Dear
    thanks

    #55877
    RNP__
    Guest

    So,if the no. of neighbors is more then 12,then signal strentgh sample will be less then 8 for each neighbor?
    Actually what is the drawback of adding more neighbors?(lets say for example greater then 12)
    Not adequate sample for each neighbor and probability to not get the measurment for the strongest(best)cell?…or what should be the problem?…
    Pix(or any 1),can you please explain?

    #55878
    Pix
    Guest

    The number of samples mean the BSC will average 8 consecutive samples and use this average in the HO algorithms.

    If there are too many neighbor cells, the MS might take too much time before detecting a new best neighbor. But it can still measure the 6 current neighbor pretty well and pretty fast. One fresh measurement sample per neighbor every 480ms. That’s the deal 🙂

    Mr. Pan seems to know the inner mechanism of a MS rather well, perhaps he can add details ?

    #55879
    Vinyek
    Guest

    Hi friends i am new in the forum i want to know that in measurement rport ms sends only neighbours which are defined in BSC or sends just the best five.

    #55880
    Rex
    Guest

    Hi Vinyek,
    MS sends 6 best neighbours from all those neighbours declared in BSC. So, even there is a neighbour with good signal and it is not declared as a neighbour, MS doesn’t send it.
    Regards,

    #55881
    Phantom
    Guest

    Yes ,Rek
    As TEMS tool , you can see the MR (Measurement Report) will send to BTS only 6 strongest Neighbors which all of them can be detected BSIC . Let’s say MS will send 6 strongest cleared NB to BTS then the BTS will forward those NB to BSC for considering HO

Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.