Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CBC

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #55798
    Dariush
    Guest

    We are working CBC server in siemens and we face problem to find protocol stack between bsc and cbc in siemens they used customized Protocol not classic x.25 so any body can help me by any hint or documents.?

    Br,
    Dariush

    #55799
    Pan
    Guest

    Dear, Dariush!
    There is no mandatory protocol stack between BSC and CBC in GSM. It is vendor dependent. In 03.49 you may find out example protocol stacks. See also 03.41 for CBS.

    #55800
    Dariush
    Guest

    Dear, Pan

    Thanks for your reply actually i read these standards but our application did’t work with such protocol stack which came inside Recommendation so that we need exact Protocol used by Simens So Any help or advice regarding Internal protocol used by siemens will be helpful.

    #55801
    Darwin
    Guest

    Hi to all,

    Can I ask your help? We have a project for CBC on two different vendor Ericsson and Alcatel.

    What program to interface the BSC and I can send CBC on to it?

    #55802
    Pix
    Guest

    The protocol stacks are (good luck in redrawing them “horizontally” ):

    – BSC
    SMS−CB
    X.25
    XOT
    TCP/UDP
    IP
    Link(802.3)

    – IP/X25 Router
    X.25 —————— X.25
    XOT —————— LAPB
    TCP/UDP ————— SERIAL LINK
    IP
    Link(802.3)

    – CBC
    SMS−CB
    X.25
    LAPB

    #55803
    pix
    Guest

    The EIM-R is the application process which manages 9130 BSC Evolution external communication with the CBC and the OMCR.

    #55804
    mehran
    Guest

    Hello Pan,
    Ok, “There is no mandatory protocol stack between BSC and CBC in GSM”.
    any way
    is any nody help me about propritary protocol between Siemens BSC and external CBC ?

    BR,
    Mehran

    #55805
    Pan
    Guest

    Hello, Mehran!
    Siemens BSC supports two options for interconnect with CBC:
    – X.25 protocol stack
    – IP protocol stack.
    They are not proprietary protocols.
    BR, Pan

    #55806
    Dariush
    Guest

    HI,Pan

    Thanks for your reply but inside the bsc TED they mentioned they have used proprietary Protocol.that why we need it to implement our application.

    Br,

    #55807
    Pan
    Guest

    Dear, Dariush!
    There is quot from Siemens BR9 description (OMN:BSC):
    The BSC is interfaced with the following Network Management systems:
    …….
    b) the Cell Broadcast Centre to support all GSM specified cell broadcast service primitives.
    …..
    In order to manage the interfaces toward these network elements, two different level 3
    protocols are supported by the eBSC:
    – The X.25 protocol;
    – The IP protocol
    with regards, Pan.

    #55808
    gsmman
    Guest

    Hi Pan.
    plz give me your email

    thanks

    #55809
    Sonit
    Guest

    Dear All,

    I am trying to broadcast a message form CBC application to ALU BSC.
    The problem is that i am able to broadcast only on channel 50, but if i try and broadcast on any other channel i am getting an error “bss capacity exceeded”.
    Is there any configuration required to be done in ALU BSC to enable the broadcast for different channel.

    Kindly help

    #55810
    Tanuj
    Guest

    Hi Sonit

    Plz check if the Channel 51 is created or not in the respective BSC.

    Regards
    Tanuj

Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.