Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Improve traffic in cells GSM1800

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #55779
    Allongo Allah Kouadio Emile
    Guest

    Hi
    I put news cells GSM1800 in my metwork but they didn’t take enough traffic.
    My objective is to improve traffic in cell 1800 more than existing cell 900. The RBS are co site. and Ericsson RBS
    All help will be appreciate
    Thanks

    #55780
    m12
    Guest

    Hello Allongo,

    May I know u’r settings for LAYER,LAYERTHR,CRO,HOCLSACC on cells in both bands?

    m12

    #55781
    allongo
    Guest

    Hi
    Before i had same parameter for both band
    Layer 2 for both, Layerthr:95 for both, CRO:0 for both, HOCLSACC:ON for both
    but yesterday i changed only layer:
    For 900 cells: layer 2 and 1800 cells: layer 1
    Thanks for help

    #55782
    m12
    Guest

    Dear Allongo,

    I suggest you try the following to push more traffic to the OL layer (GSM1800)and observe the statistics:

    CRO=10 and LAYERTHR=85.

    m12

    #55783
    RUN
    Guest

    To offload 900 Band, another way could be
    1. to set CRO =0
    2. to set ACCMIN for 1800 equal to LAYERTHR for 1800MHz (ACCMIN for 900Mhz could be -104dBm).

    With this,
    Idle MS will camp on 900Mhz and during call setup Locating will transfer the calls to 1800Mhz (for those who satisfy LAYERTHR).

    This way,
    1800Mhz will become congested earlier than 900Mhz. During congestion 1800Mhz will transfer new calls to 900MHz through Assignment to other cell.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.