Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

incoming HO problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #55750
    rcdece
    Guest

    can anybody help us regarding our problem with incoming HO on indoor site. We already tried PBGT and umbrella HO, but still it does not handover. Is there any parameters we can modified in order to have between macro and indoor? thanks

    #55751
    rcdece
    Guest

    by the way it is a nokia equipment. thanks

    #55752
    Pix
    Guest

    I don’t know nokia, but if these HO causes are enabled, then the problems could be:
    – wrong thresholds on level
    – wrong thresholds on traffic

    But i really don’t know the specifics, so I can’t help you.

    Hope someone else can…
    Pix

    #55753
    bill
    Guest

    experiencing a similar problem but in ericsson network, both msc and bsc.for newly added BSC incoming HO fails, outgoing is ok, any ideas?

    #55754
    agp
    Guest

    Hi rcdece,
    maybe you can try this setting on ADCE : from GSM/DCS >> indoor cell (PBGT = 63 (off), AUCL ~ 25/30, ACL = 3) .. ho will work only due to umbrella. from indoor >> gsm/dcs (PBGT = 63, AUCL = 63, ACL = 2) ho will depending on LDR/LUR only. Indoor cells is always “lowered” than DCS/GSM cells and DCS/GSM were “uppered” than Indoor cell.

    #55755
    Bijoy
    Guest

    Hi rcdece
    What is the max BTS power of the indoor site?If it is less than MACRO sites,use cell priority feature & observe.

    Br\\
    Bijoy

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.