Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

max pdch VS Active PDCH

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #55680
    Jacky
    Guest

    Hi all, i want to ask if the active PDCH in the cell (RNO indicator) could exceed the MAX PDCH value defined in the cell?

    #55681
    Jacky
    Guest

    Any feedback plz.

    #55682
    Pix
    Guest

    I have to check it out. The algo have changed in B9. I’ll get back to you.

    #55683
    Jacky
    Guest

    Ok pix i’am waiting for ur reply.

    #55684
    Pix
    Guest

    … thinking about it, don’t worry.

    #55685
    pix
    Guest

    The MAX PDCH is the max number of PDCH in the cell, ever, dot.

    #55686
    Jacky
    Guest

    it’s clear for the MAX PDCH,otherwhise whats the RNO indicator that gives the number of PDCH used in the cell for a given granularity?

    #55687
    Pix
    Guest

    ok, there are a lot of indicators about PDCH usage… They all seem so similar.

    Perhaps these ones will give you what you need :
    GPRS_MAX_PDCH_Dyn_min ( QRPALSAI_NA )
    GPRS_MAX_PDCH_Dyn_max ( QRPALSAM_MA )
    GPRS_MAX_PDCH_Dyn_avg ( QRPALSAN )
    GPRS_MAX_PDCH_Dyn_avg_BH ( QRPALSAN_BH )
    GPRS_MAX_PDCH_Dyn_avg_max ( QRPALSAN_MA )
    GPRS_MAX_PDCH_Dyn_avg_min ( QRPALSAN_NA )

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.