Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

1800 power control

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #55573
    Dual band
    Guest

    hi
    Do any body has suggsetion for 1800 MHz band power control if there RX quality execution for increase and decrease power between 0 and 2 and for RX level is between -70 to -80dBm. is this correct for 1800Mhz or it should be changed .

    #55574
    Pix
    Guest

    Hi,
    I don’t understand the question, sorry.

    #55575
    Dual band
    Guest

    Pix
    what I meant is that if my power control setting will not take increase and decreae with respect of level from -80 to -70 dBm and with respect of Quality is between 0 and 2 such that power control not change

    #55576
    Pix
    Guest

    Hi again,

    I’m really sorry… I still don’t understand. When I read your last post, i understand this:

    IF no change of power when RXLEV between -80 and -70dBm and when RXQUAL between 0 and 2

    THEN: power control not change

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    It’s a loop. There is no question. Wait, let me read again.

    #55577
    dualband
    Guest

    hi PIX
    What will be your suggestion for 1800 Mhz power control setting .

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.